|
Post by Richie3Jack on Aug 17, 2012 12:23:51 GMT -5
The Micro Groove HM designs are new to the Wishon line for 2012. These wedges have more of a modern design than the older Wishon wedges. They also feature the ‘blade-on-blade’ design that Hogan Company loved to make with their irons. Wishon Golf claims that this moves the CoG higher up on the face to allow for a more penetrating ball flight. In order to combat the move to the conforming grooves, Wishon Golf has created the micro grooves much like Nike and Callaway have done in order to increase spin. But, they have also utilized a horizontal milling process which will create more friction in between the micro grooves in order to help create more spin. The wedges are made from 8620 carbon steel but are investment cast instead of forged. Still, they feel much like the Vokey designs which are also made from investment cast using 8620 carbon steel. The wedges do not have a tremendous amount of bounce as it seems to me that more companies are following Edel Golf’s route of increasing the bounce angle. They also require a 0.370 shaft tip and many wedge shafts do not offer that tip size. However, one can use a 0.355 wedge shaft and install it properly using a shim and never notice the difference. I have the 52° wedge and I like it outside of the head weight. I use 3/8” increments between clubs, even my wedges and this head needs to weigh more like 295 grams instead of 283 grams. It can still be easily matched to MOI, but it will just take a lot of high density lead tape. 3JACK
|
|
|
Post by cwdlaw223 on Aug 17, 2012 12:36:31 GMT -5
Any chance one could get the club to alter the bounce before the chroming process? I suspect it's hard to grind this type of wedge. Maybe I'm wrong.
Why the different tip size? I suspect Wishon has a good reason and am curious.
|
|
|
Post by Richie3Jack on Aug 17, 2012 12:43:47 GMT -5
Wishon uses 0.370 on their irons and wedges. If you look at other component companies, they do the same thing. I think Scratch Golf uses 0.355, but I don't really consider them a component company anymore.
I believe the reason why they use them is:
1. Easier to stock
2. You can still use a 0.355 tip, just add a shim (I honestly cannot feel the difference and have yet to have a customer who could tell a difference).
3. 0.370 shafts will perform and feel like their bend profile says. There are some shaft models by different companies where the bend profile is different from 0.355 to 0.370 models. KBS is one. The 0.355 tips have a stiffer bend profile than their 0.370 counterparts. But if the bend profile for a shaft model is the same between a 0.355 tip and a 0.370 tip, you won't feel the difference.
3JACK
|
|