Post by Richie3Jack on Jan 29, 2010 17:20:20 GMT -5
Here's a look at mine:
Current Driver: Cleveland Hi-Bore XLS 10.5* Fujikura Shaft, Stiff Flex, Hi Launch
Plan: Probably something that is both lower lofted and lower launch shaft. Maybe the Adams line of drivers and something near a 9* loft. Will definitely get fitted with Trackman when deciding this
Current 3-wood: Cleveland Hi-Bore XLS 15* Fujikura Shaft, Stiff Flex, Hi Launch
Plan: Something that launches lower and maybe a 13* loft. I have difficulty finding 3-woods I like so I could go a variety of direction, like the Tour Edge Exotics.
Current 3-Hybrid: Mizuno Fli-Hi CLK 20* loft, 39" long Steel TT DG Hybrid Shaft, Stiff
Plan: Keep hybrid, might make it a little heavier or change the shaft, but pretty happy with it.
4-PW: Mizuno MP-62, 1* strong loft, 3* upright, +1/2" over standard. Rifle FCM shafts 5.5. D-1 swingweight.
Plan: Hogan IPT 4-Equalizer. I'll probably put KBS Tour shafts in them, and make them about standard length (38" for a 5-iron) and probably go either with standard lies or 1-2* flat. I'll fiddle around with the lofts until I get what I like and the same with the swingweights.
Basically my goal is to get the Hogan's to go as far as my Mizuno's, but to do it with standard shaft lengths, and flatter lie angles.
GW: Nickent ARC 50* loft, TT Dynamic Gold S300 shaft. 3* upright.
Plan: Same Club, but perhaps a different shaft (KBS) and flatten out the lie angle. Make the club the same length as the PW. Will fiddle with the swingweight, although club is already pretty heavy
SW: Titleist Vokey 54*, 10* bounce. TT DG Wedge shaft. Standard length, standard lie.
Plan: Probably same club, just a change in lie angle and swing weight. If I can't change the lie angle, then I'l find a forged SW that I like.
LW: Cleveland 588 BeCU 60* loft, TT DG Wedge shaft
Plan: Probably a Vokey 58 or 60* LW. Will change swingweights and lie angles accordingly.
3JACK
Current Driver: Cleveland Hi-Bore XLS 10.5* Fujikura Shaft, Stiff Flex, Hi Launch
Plan: Probably something that is both lower lofted and lower launch shaft. Maybe the Adams line of drivers and something near a 9* loft. Will definitely get fitted with Trackman when deciding this
Current 3-wood: Cleveland Hi-Bore XLS 15* Fujikura Shaft, Stiff Flex, Hi Launch
Plan: Something that launches lower and maybe a 13* loft. I have difficulty finding 3-woods I like so I could go a variety of direction, like the Tour Edge Exotics.
Current 3-Hybrid: Mizuno Fli-Hi CLK 20* loft, 39" long Steel TT DG Hybrid Shaft, Stiff
Plan: Keep hybrid, might make it a little heavier or change the shaft, but pretty happy with it.
4-PW: Mizuno MP-62, 1* strong loft, 3* upright, +1/2" over standard. Rifle FCM shafts 5.5. D-1 swingweight.
Plan: Hogan IPT 4-Equalizer. I'll probably put KBS Tour shafts in them, and make them about standard length (38" for a 5-iron) and probably go either with standard lies or 1-2* flat. I'll fiddle around with the lofts until I get what I like and the same with the swingweights.
Basically my goal is to get the Hogan's to go as far as my Mizuno's, but to do it with standard shaft lengths, and flatter lie angles.
GW: Nickent ARC 50* loft, TT Dynamic Gold S300 shaft. 3* upright.
Plan: Same Club, but perhaps a different shaft (KBS) and flatten out the lie angle. Make the club the same length as the PW. Will fiddle with the swingweight, although club is already pretty heavy
SW: Titleist Vokey 54*, 10* bounce. TT DG Wedge shaft. Standard length, standard lie.
Plan: Probably same club, just a change in lie angle and swing weight. If I can't change the lie angle, then I'l find a forged SW that I like.
LW: Cleveland 588 BeCU 60* loft, TT DG Wedge shaft
Plan: Probably a Vokey 58 or 60* LW. Will change swingweights and lie angles accordingly.
3JACK
