|
|
Post by golfluvzme on Jun 28, 2011 21:58:02 GMT -5
It may not be an exact match, but you can see the influence that the Bank Bar Mini had on this SouthPaw creation, from today. She will tip the scales at a maximum of 370 grams and can easily be trimmed down depending on hosel selection and a few other items. There is still some good shaping left to do, as well as softening the corners and rough edges. Look for some pictures, but don't expect this one to last. It was made without a customer, so she is available. Fire me an email at lamont@mannkrafted.com if you think it may be something you need. Thanks, LaMont in AZ       |
|
|
|
Post by cloran on Jun 30, 2011 9:57:57 GMT -5
Cool idea, showing three different millin options on one face.
Heck, a lunatic like me might actually want it... "I'll take the harlequin please!"
Have you made any heads, with the Bank Bar styling, but in a 10cm-ish head? I'm thinking something along the lines of the Byron 10.5 in size... Not quite a mini and not quite standard.
|
|
|
|
Post by golfluvzme on Jun 30, 2011 12:08:21 GMT -5
I have not done so, but now the seed has been planted. I will measure this little gem and see if I can land one somewhere in the middle. I have an idea in my head, already for today's work, but I am at the mill, nearly every day, so the mid-size is soon to happen.
Thanks for the input.
LaMont in AZ
PS, I have to find a LH locally to roll this little beast. I had a plumbers neck set on it, yesterday and she is grass-worthy. Put a LH putter in my hands is sort of like............well, that story is inappropriate..........it is very odd, we'll stick with that.
|
|
|
|
Post by golfluvzme on Jul 1, 2011 23:22:38 GMT -5
I set a plumbers neck on this one and it was so darned cute it HAD to happen. Check out the beaded black oxide finish and conservative stamping. All you lefties out there, this one has not be spoken for and needs a home. Contact me here for pricing and I'll do my best to get back to you quickly. Thanks, LaMont in AZ       |
|
|
|
Post by golfluvzme on Jul 3, 2011 3:28:58 GMT -5
This rascal may be getting a new face milling. We all know that it resembles a pattern that another company has put a lot of money and research into. That was not the motivation in doing this face. It was a case of "I am tired of doing the same old milling every time." I look at it now and think that I can do it different and not step on anyone's toes along the way. Just to be clear, nobody contacted me about this, it is just something that was mentioned by a neutral party and I see that changing it can do nothing but good.
I have ideas flowing thru my brain, right now, but I'll sleep on them and see what clarity Sunday morning brings me.
That is the only feature that will be affected, and she will remain 350 grams +.
Thanks for the comments and I'll keep posting new pics.
LaMont in AZ
|
|
|
|
Post by rohlio on Jul 3, 2011 14:08:06 GMT -5
That makes me wish I was left handed.
|
|
