|
Post by Richie3Jack on Jan 9, 2013 15:37:13 GMT -5
|
|
|
Post by golfbaka on Jan 16, 2013 5:30:50 GMT -5
I'm excited to see how the new S2S Red will be received... shame there's not a 85 gram wood version though.
|
|
|
Post by Richie3Jack on Jan 16, 2013 8:58:41 GMT -5
I've been hitting the 575MMC 3-iron and liking it. It has a bit more pop to hit than my 555C 3-iron. I'm going to wait until my demo 575MMC 6-iron comes back and see how I like it.
3JACK
|
|
|
Post by golfbaka on Jan 16, 2013 10:45:08 GMT -5
I just picked up a 949MC 5 wood yesterday with the S2S Black 85 shaft. My fitter (golfbats.com) hadn't tried the Red yet or the 575MMC yet.
|
|
|
Post by Richie3Jack on Jan 16, 2013 10:56:22 GMT -5
575MMC have a fairly small head, but are progressive cavity to muscle back. They have lower lofts and lower CoG to make the ball travel further. They are as forgiving as the 555C's, but the smaller head helps with sharpening your precision. They have a big more zing off the face.
The CB's can go up as high as the 7-iron. The MB's go as long as the 5-iron.
I've been thinking of doing a set of with something like the new 771 3 & 4-irons for ultimate distance and trajectory. A cb 575 MMC 5-iron, then muscle in the 575 6-AW.
3JACK
|
|
|
Post by Richie3Jack on Jan 16, 2013 10:56:51 GMT -5
Also, I'm thinking of going to the 739CCG driver head.
3JACK
|
|
|
Post by golfbaka on Jan 16, 2013 11:06:56 GMT -5
575MMC have a fairly small head, but are progressive cavity to muscle back. They have lower lofts and lower CoG to make the ball travel further. They are as forgiving as the 555C's, but the smaller head helps with sharpening your precision. They have a big more zing off the face. The CB's can go up as high as the 7-iron. The MB's go as long as the 5-iron. I've been thinking of doing a set of with something like the new 771 3 & 4-irons for ultimate distance and trajectory. A cb 575 MMC 5-iron, then muscle in the 575 6-AW. 3JACK You've come a long way from the guy that 'doesn't do mixed sets' LOL
|
|
|
Post by golfbaka on Jan 16, 2013 11:11:28 GMT -5
As far as the 757MMC goes - I didn't care too much for the look of it. But I have found that Wishon clubs look FAR FAR better in real life than they do in the stock photos.
|
|
|
Post by Richie3Jack on Jan 22, 2013 14:49:51 GMT -5
I got my demo 575MMC 6-iron back. I actually had a spare 6-iron head that I found in my dresser drawer Anyway, this one has a Stepless Steel R-flex. Wishon's shafts are usually a little stiffer from butt-to-tip section than youre typical flex designations. I really haven't look at 6-iron that much but I like what I see. Today I hit it. The shaft is not to my shaft length and the lie angle is a little upright for me, but I still hit it quite well and I liked the trajectory. Wishon says it has more offset than the 555M, but I thought the opposite. Hopefully, I will get my 870TI 3-iron in the next day or so and get to try that out as well. 3JACK
|
|